The best tips for a mold and leak free bathroom

Nobody wants a dirty bathroom! Good running water, clean toilets, and waterproof shower are just some of the things we aspire our bathroom to always have. But one major reason for a filthy-looking bathroom is molded. According to the US Environmental Protection Agency, mold can start growing on damp or wet surfaces and materials within 2 days. Lavatories are hotbeds for molds since water is constantly present on its surfaces, from the tiles on the walls to the floor. Though most molds present no danger, they can be unsightly and irksome. So here are some helpful tips to make your bathing experience mold-free.

Clean often and clean well

It is recommended to clean your bathroom at least twice a week especially if a lot of people in your household use it. It only takes 24-48 hours for mold to start growing and they tend to cluster themselves along tile crevices, on water buckets, and faucets. There are lots of mold and mildew cleaners in grocery aisles but if you want to go natural or chemical-free, using ingredients like baking soda or vinegar can help. And don’t forget that as you clean, check for water damage and seek for leaky showers repair if needed.

Check your indoor humidity

High humidity and poor air ventilation can promote mold growth. Molds love these conditions because moisture is kept at a high level in your bathroom especially when you have damaged faucets or leaky showers for repair. Make sure your bathroom windows are open so air can circulate. You can also purchase de-humidifiers that are mostly available in hardware stores and in bath sections of groceries or department stores. A dry mat is also a nice addition to your toilet but make sure to dry it out once it gets soaked.

Waterproof your shower

Having a designated wet and dry area in your bathroom can also control the spread of molds. Start by waterproofing your shower to keep water puddles contained. If you have waterproofing installed and molds still grow often, then you may need to call professionals who can do shower leak repairs in Sydney. Shower faucets are common reasons for mold growth and they usually develop in the surface or area where there is a leak. There are water sealants that can be bought for self-repair but it is not advisable as these can only be temporary Band-Aid solutions to a bigger problem. Professional plumbers are the best people to handle this kind of scenario.

VN:F [1.9.22_1171]
Rating: 10.0/10 (1 vote cast)
VN:F [1.9.22_1171]
Rating: +1 (from 1 vote)
The best tips for a mold and leak free bathroom, 10.0 out of 10 based on 1 rating